Six compartment trunk case. Ref. 7088

Case will be made from 9.5 mm birch plywood with a black rigid PVC finish. The case will be fitted with interlocking aluminium sections to the joint edges to give a splash proof seal. Edges will be fitted with 30 mm aluminium angle riveted every 100 mm. Large zinc coated pressed steel ball corners and edge brackets will increase strength and protection. The lid will be secured to the base with two large butterfly type catches at the front and three large lid stays with piano hinge at the back.  Eight recessed sprung handles are fitted as shown.

Internally the case will be split into the six compartments with 25mm dense foam in the base.