The case has 20u of usable rack space and the middle section (with lids removed) is 500mm. The lid depths are 100mm deep which will come in if you have any large plugs etc sticking out of the front or back of the rack.
Case is made from 9.5 mm birch plywood with a black mesh finish. The case is fitted with interlocking aluminium sections to the joint edges to give a splash proof seal. Edges are fitted with 30 mm aluminium angle riveted every 100 mm. Large zinc coated pressed steel ball corners and edge brackets increase strength and protection. Each lid is secured to the case with four large butterfly type catches. Extra large heavy duty recessed sprung handles are fitted as shown (2 per side). The base is fitted with 2 braked and 2 non braked 100mm swivel castors. An A5 recessed label dish is fitted to one lid for use with A5 self adhesive gig labels.
The case has never been used and is made from all new components but there may be the odd mark on it, these will not effect the way the case functions in any way.